Panasonic CT 27D11 - Manual (Page 9)

8
I NSTALLATION
Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the
back of your TV.
Notes:
r
There are three video inputs, Y, P
B
, and P
R
. Separate component color inputs provide
luminance and color separation. Use the L (left) and R (right) audio inputs.
r
Select DTV-STB to 480i output mode. TV set can receive 480i signal only.
Amplifier Connection (To Audio Amp)
Connect to an external audio amplifier input for listening to a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON from AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier.
CABLES NOT SUPPLIED
COMPONENT
VIDEO INPUT
INPUT 1
R AUDIO L
P
B
P
R
Y/VIDEO
TO AUDIO
AMP
L
R
R AUDIO L INPUT 2 VIDEO
S-VIDEO
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV
NTSC OUTPUT
R-AUDIO-L VIDEO
P
B
P
R R-AUDIO-L
S-VIDEO
Y
DIGITAL OUTPUT
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
COMPONENT
VIDEO INPUT
INPUT 1
R AUDIO L
P
B
P
R
Y/VIDEO
TO AUDIO
AMP
L
R
R AUDIO L INPUT 2 VIDEO
S-VIDEO
External Amplifier
0373 -1E.fm Page 8 Monday, February 26, 2001 3:47 PM