Philips SPZ2000 - Manual (Page 5)

4
Connect the webcam to your
PC/notebook
1
Turn on the PC/notebook.
2
Clamp the webcam on your PC monitor
or notebook display.
Extend the clamp to place the •
webcam on a desk or (large) desktop
monitor.
3
Connect the cable to a USB port on the
PC/notebook.
After the webcam is properly »
connected, the following pop-up
window is displayed at the lower right
corner of the screen .
4
Adjust the webcam in a proper angle.
2 Get started
(Optional) Install the webcam
software
Note
To use special features provided by Philips •
CamSuite and Webcam Driver SPZ2000,
visit www.philips.com/support and download
the applications from the website. Philips
CamSuite only works on PCs with the
operating systems Microsoft
®
Windows XP
®
(SP2 and higher), Vista, or Windows 7. After
the software installation, you can adjust Philips
SPZ2000 webcam settings on respective
property pages.
1
At www.philips.com/support, click the
Choose country / language box to select
your country/language.
2
Click the Search box, enter SPZ2000 and
then click the search button.
3
Click Support for SPZ2000 .
Under » Product support, you will find
information about Software and driver.
4
Download the software installer that you
want.
5
Run the installer and follow the
instructions on the screen to complete
the installation.
After the software installation is »
complete, the Philips CamSuite icon
is displayed at the lower right corner of
the screen.
Tip
You can use the same way to download the •
latest software available for Philips SPZ2000
webcam.
EN