Panasonic KX-TG5771 - Manual (Page 15)

Preparation
For assistance, please visit http://www.panasonic.com/help 15
Setting up the base unit
Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (
A) and telephone
line jack ( B). Connect the AC adaptor cord
by pressing the plug firmly ( C).
L Use only the included Panasonic AC
adaptor PQLV207.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same telephone
line or to the same telephone jack using
a Panasonic T-adaptor (page 11).
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 37) do not
function properly.
Hook
(120 V AC,
60 Hz)
To single-line
telephone jack
(RJ11C)
A
C
B
Noise filter
To single-line
telephone
jack (RJ11C)
TG5771_5776_5777.book Page 15 Friday, February 23, 2007 3:52 PM