Panasonic KX-TG1034 - Manual (Page 37)

Useful Information
For assistance, please visit http://www.panasonic.com/help 37
5 Connect the telephone line cord.
Mount the unit by inserting the
mounting pins into the round
openings on the adaptor (for pin
2,
use round cut out at the bottom of the
adaptor if you are using the 4 inches
phone plate), then sliding the unit
down to secure it.
Connect the AC adaptor to power
outlet (page 9).
L
There are two common types of
wall phone plates. The distance
between
1 and 2 may vary
depending on the size of the wall
phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers
(
A), remove the adaptor (B).
Belt clip
You can hang the handset on your belt
or pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip(
A),
pull the right edge in the direction of the
arrow (
B).
83 mm
(3
1 / 4 inches)
102 mm
(4 inches)
2
1
83 mm
(3 1 /
4
inches)
or
102 mm
(4 inches)
1
(120 V AC,
60 Hz)
2
B
A
A
A
B