Philips LPF 935 - Manual (Page 18)

18 Philips LPF 920 · 925 · 935 · 940
EN
7 SMS
Function is not supported in all countries and networks (Function is not supported in all countries and
networks)
SMS Requirements
CLIP for SMS
Your device is preset for using the SMS (Short Messaging
Service) services. Caller Line Identification (CLIP) must be
activated for the SMS to work. It is possible that you will
not be able to send and receive SMS messages from a pri-
vate branch exchange (depending on the country and net-
work).
SMS with secret number
SMS Requirements
Sending SMS
1 Press _.
2 Using [ select SEND SMS .
3 Confirm with OK.
4 Enter the text using the keys (A—Z). You can enter
160 characters.
5 Press _.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Press _. The message is sent.
Sending to Multiple Recipients (= Broad-
casting)
1 Press _.
2 Using [ select SEND SMS .
3 Confirm with OK.
4 Enter the text as described under Sending SMS.
5 Press _.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Press À.
8 Enter the next telephone numbers. Between the indi-
vidual recipients, press À. You can enter up to 10 re-
cipients.
9 Press _. The message is sent.
Direct Inward Dialling or Selecting Sub-
address
1 Press _.
2 Using [ select SEND SMS .
3 Confirm with OK.
4 Enter the text as described under Sending SMS.
5 Press _.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Enter the direct-inward dialling number or sub address.
8 Press _. The message is sent.
Receiving SMS Messages
Receiving SMS Messages
When you have received an SMS, the green light â/_
will shine on your device, and the _ symbol will appear
on the display. Received SMS messages are printed out au-
tomatically. If you have turned the automatic printing
function off, the SMS messages will be stored. Your device
can store up to 30 SMS messages.
Reading SMS Messages
1 Press _.
2 Using [ select READ SMS .
3 Confirm with OK.
4 Using [ select the SMS that you would like to read.
Unread SMS messages are marked with a star *.
5 Confirm with OK.
Printing SMS Messages
1 Press _.
2 Using [ select PRINT SMS .
3 Confirm with OK.
Should you face problems in sending SMS, the rea-
son for the same could be that you are using a secret
number or that the device is connected to an old
ISDN System.
Ask your telephone service provider...
... whether you must register for the SMS Service.
... to which mobile telephone service providers you
can send SMS
... which costs are applicable.
... which functions are available.
You can also call the function by pressing OK,
31
and OK.
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
To insert special characters and symbols, press
;ü
. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
You can move the cursor using [. Use C to de-
lete individual characters. Press COPY to print
the message before sending it.
You can also call the function by pressing OK,
31
and OK.
You can also call the function by pressing OK,
31
and OK.
You can also call the function by pressing OK,
32
and OK.
You can also call the function by pressing OK,
34
and OK.