Philips LPF 935 - Manual (Page 30)

30 Philips LPF 920 · 925 · 935 · 940
EN
12 Service
Changing the Toner Cartridge
Original Consumable Materials
Instructions on the Packaging
Plug’n’Print Card
Before you can receive documents, make copies, or print,
a toner cartridge must be inserted into the device. For this
reason, a starter cartridge is supplied with the device. The
toner level memory for this starter cartridge was set at the
factory. The starter cartridge need not be updated with a
Plug’n’Print card. For each additional toner cartridge that
you insert into your device, you must update the toner lev-
el memory with the Plug’n’Print card provided.
1 Open the cover by taking hold of both document
guides and tipping the cover backward.
2 Remove the old toner cartridge, by gripping it at the re-
cess in the middle and pulling it upward.
3 Take the new toner cartridge from the package.
4 Remove the black protective foil and other packaging
material, but do not yet remove the protective
strip from the cartridge
.
5 Shake the new toner cartridge back and forth several
times in order to distribute the toner evenly, thereby
improving the print quality.
6 Only after completely pull off the protection strip lo-
cated on the left side of the cartridge.
7 Place the toner cartridge into your device. The cartridge
should snap securely into position.
8 Close the cover. Make sure that the cover snaps securely
into position on both sides.
9 NEW CARTRIDGE? appears on the display. Confirm
with OK.
Use only original consumable materials. These are
available from a specialised retailer or through our
order service (see back side of this user manual). Oth-
er consumable materials can cause damage to the de-
vice.
Follow the instructions on the packaging of the con-
sumable materials.
Carefully remove the toner cartridge from the de-
vice so that no toner dust spills out. Take care
where you place the toner cartridge, escaping ton-
er dust may soil the surface.
Store opened or used toner cartridges in their
original packing or in a plastic bag in order to pre-
vent toner dust from escaping. Dispose of old
toner cartridges by turning them in at specialised
shops or at a waste collection site. Never dispose
of toner cartridges by throwing them into fire.
Toner cartridges should never be allowed into the
hands of children.
Never open a toner cartridge. If toner dust is re-
leased into the air, you should avoid allowing it to
contact your skin and eyes. Do not inhale the re-
leased toner dust. Remove the toner dust from
clothing or objects with cold water; hot water
would only cause the toner to set.
Once you have removed the protection strip, do
not shake the toner cartridge any more. Other-
wise, it is possible that toner dust will be released
into the air.