Panasonic AJ-P2C016RG - Manual (Page 170)

170 Menu: Menu Description Tables
The ____ in the Adjustable Range column indicates the preset mode.
Menu Description Tables
SYSTEM SETTING
SYSTEM MODE
Items/
Data Saved
Adjustable
Range
Remarks
SYSTEM MODE 1080-59.94i
1080-23.98PsF
1080-24PsF
1080-50i
For setting the system frequency.
When this item is switched, turn off the
POWER switch on the unit and then
turn it on again.
Notes
When USB DEVICE mode is
selected, no change can be made to
this option.
When the remote control unit (AJ-
RC10G) is connected, this item is
not displayed.
S C U F –
REC FORMAT Used to set the codec mode and the
recording/shooting mode.
DVCPROHD:
Recording is performed using
DVCPRO HD codec.
AVC-I 100:
Recording is performed using
AVC-Intra100 codec.
AVC-I 50:
Recording is performed using
AVC-Intra50 codec.
DVCPROHD/60i
AVC-I 100/60i
AVC-I 100/30PN
AVC-I 100/24PN
AVC-I 50/60i
AVC-I 50/30PN
AVC-I 50/24PN Used when SYSTEM MODE is set to
1080-59.94i.
When DVCPROHD/60i is selected, it is
possible to refine the shooting mode
selection by setting CAMERA MODE.
AVC-I 100/24PN
AVC-I 50/24PN Used when SYSTEM MODE is set to
1080-23.98PsF or 1080-24PsF.
DVCPROHD/50i
AVC-I 100/50i
AVC-I 100/25PN
AVC-I 50/50i
AVC-I 50/25PN Used when SYSTEM MODE is set to
1080-50i.
When DVCPROHD/50i is selected, it is
possible to refine the shooting mode
selection by setting CAMERA MODE.
S C U F R
Items/
Data Saved
Adjustable
Range
Remarks
CAMERA MODE (DVCPROHD/
60i of 1080-
59.94i)
60i
30P
24P
24PA
(DVCPROHD/
50i of 1080-50i)
50i
25P
(Modes other
than the above)
24P
25P
When using the DVCPRO HD recording
format in the 1080-60i or 1080-50i
modes, the pull-down method
(conventional camera mode) will be set.
S C U F R
VFR OFF
ON This is for setting the variable frame rate.
OFF:
Operates with a fixed frame
number. Operates with a frame
rate set using REC FORMAT.
ON: Operates with a variable frame
rate. Operates with a frame rate
set using FRAME RATE.
Note
When INTERVAL REC or LOOP REC is
set, this setting is set to “OFF”.
S C U F R
24P VFR RANGE 24FRAME
30FRAME
Select the upper limit of the frame rate
that can be changed during VFR.
This item is displayed only when “1080-
23.98PsF” or “1080-24PsF” is selected
in SYSTEM MODE.
Note
Sequence of the HD SDI output signal
will be disturbed when this item is set to
“30FRAME” and FRAME RATE is set to
“24-30FRAME”, but this is not a
malfunction.
– – – F –
FRAME RATE (1080-59.94i,
1080-23.98PsF,
1080-24PsF)
1FRAME
:
24FRAME
:
30FRAME
(1080-50i)
1FRAME
:
25FRAME
This is for setting the shooting frame
number during VFR operation.
When the mode has been changed
using other settings and the frame rate
value set here exceeds the maximum
frame rate allowed by the set mode, the
maximum frame rate is changed to the
maximum frame rate of the set mode.
S C U F R
AJ-HPX3700G-VQT1V68_eng.book 170 ページ ２００８年１０月１５日 水曜日 午後６時３８分