Panasonic KX-MB3020 - Manual (Page 17)

2. Preparation
17 For assistance, please visit http://www.panasonic.com/help
2.4 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB3020
only)
You can select the desired mode by pressing one of the
following buttons.
* The pictured model is KX-MB3020.
–
{ Scan}: Select this mode when using the unit as a
scanner (page 30).
– { Copy}: Select this mode when using the unit as a
copier (page 34).
– { Fax} (KX-MB3020 only): Select this mode when
using the unit as a fax machine (page 41).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57) (KX-MB3020 only).
Document Requirements
2.5 Setting the original
2.5.1 Using the scanner glass
1 Open the document cover (
1).
2 Place the document FACE DOWN on the scanner
glass (
2), aligning the top left of the document with
the corner to which the m mark points.
3 Close the document cover.
Note:
L Confirm that there are no documents in the
automatic document feeder.
L Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
L If the original is a thick book, do not close the
document cover.
L Confirm that any ink, paste or correction fluid has
dried completely.
L Effective scanning area is as follows:
Effective scanning area
L Shaded area will be scanned.
2
1
208 mm
(8 3 /
16
")
348 mm
(13 11 /
16
")
4 mm
( 5 /
32
")
4 mm
(
5 /
32
")
4 mm
( 5 /
32
")
4 mm
( 5 /
32
")