Panasonic KX-MB3020 - Manual (Page 64)

9. Programmable Features
64
9.5 PC print features
Feature/Code Selection
Setting the paper input tray in
PCL
{#}{
7}{6}{0}
(KX-MB3020 only)
This feature will be displayed only when the lower input tray is installed (page
74).
{
1} “ #1” (default): Standard input tray
{ 2} “ #2”: Lower input tray
{ 3} “ #1+#2”
Note:
L To select “ #2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
L To select “ #1+#2”,
– select the same paper size for the standard input tray (feature #380 on
page 57) and lower input tray (feature #382 on page 57). If either is
changed, “
#1” will be selected automatically.
– select “ PLAIN PAPER” or “THIN PAPER” for the recording paper type
setting (feature #383 on page 57).
Setting the number of copies
in PCL
{#}{
7}{6}{2}
(KX-MB3020 only)
1. {Menu} i {#}{7}{6}{2} i {Set}
2. Enter the number of copies from “ 001” to “999”, using the dial keypad.
L The default setting is “ 001”.
3. {Set} i {Menu}
Setting the recording paper
size in PCL
{#}{
7}{6}{3}
(KX-MB3020 only)
{ 1} “ LETTER” (default): Letter-size paper
{ 2} “ A4”: A4-size paper
{ 3} “ LEGAL”: Legal-size paper
Setting the image reduction
feature in PCL
{#}{
7}{6}{4}
(KX-MB3020 only)
{ 0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): The document resolution will be automatically reduced
when the data size is too large to print.
Note:
L This feature may lower the print quality by reducing the resolution.
Setting the recording paper
direction in PCL
{#}{
7}{6}{5}
(KX-MB3020 only)
{ 1} “ PORTRAIT” (default): The document will be printed in portrait direction.
{ 2} “ LANDSCAPE”: The document will be printed in landscape direction.
Setting the A4 wide feature in
PCL
{#}{
7}{6}{6}
(KX-MB3020 only)
You can change the margin and printable area of A4-size recording paper so
that 80 characters in 10 cpi font may be printed on a line.
{
0} “ OFF” (default): Deactivates this feature.
{ 1} “ ON”: The margin and printable area of A4 recording paper will be changed.
Setting the line per page in
PCL
{#}{
7}{6}{7}
(KX-MB3020 only)
To set the number of lines per page in PCL printing.
1. {Menu} i {#}{7}{6}{7} i {Set}
2. Enter the number of lines per page from “ 005” to “128”, using the dial
keypad.
L The default setting is “ 060”.
3. {Set} i {Menu}
Setting the font source in PCL
{#}{
7}{6}{8}
(KX-MB3020 only)
This feature is available when the downloaded font is registered to the unit.
{
1} “ RESIDENT” (default): The document will be printed using resident font.
{ 2} “ DOWNLOAD FONT”: The document will be printed using download font.