Panasonic KX-MB3020 - Manual (Page 68)

9. Programmable Features
68
9.7 LAN features
Feature/Code Selection
LAN setting with a DHCP
server
{#}{
5}{0}{0}
{ 0} “ DISABLED”: Deactivates this feature.
{ 1} “ ENABLED” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
–
IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
{#}{
5}{0}{1}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{1} i {Set}
2. Enter the IP address of the unit on the LAN using the dial keypad. i {Set}
i {Menu}
Setting the Subnet mask for
the LAN connection
{#}{
5}{0}{2}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{2} i {Set}
2. Enter the subnet mask of the network on the LAN using the dial keypad. i
{ Set} i {Menu}
Setting the default gateway
for the LAN connection
{#}{
5}{0}{3}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{3} i {Set}
2. Enter the default gateway of the network on the LAN using the dial keypad.
i {Set} i {Menu}
Setting the primary DNS
server for the LAN
connection
{#}{
5}{0}{4}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{4} i {Set}
2. Enter the primary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
Setting the secondary DNS
server for the LAN
connection
{#}{
5}{0}{5}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{5} i {Set}
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
Setting the machine name
{#}{
5}{0}{7}
1. {Menu} i {#}{5}{0}{7} i {Set}
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 72 for character entry).
L The following symbols can also be entered.
! @ # $ % ^ & ' ) ( . - _ { }
3. {Set} i {Menu}
Note:
L In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
Displaying the MAC address
of the unit
{#}{
5}{0}{8}
1. {Menu} i {#}{5}{0}{8} i {Set}
2. The MAC address of the unit will be displayed. i {Menu}