Panasonic DP-8032 - Manual (Page 64)

64
Making Copies
Other Features
■ ■ ■ ■ ■ Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time. To store a job in memory
M1, M2, M3, M4, M5
Set up the copy job
to be stored.
NOTE
● JOB MEMORY mode will not be deleted even if the power switches are turned Off.
● When storing a new job into a programmed memory location, the previously stored job will be
overwritten and erased.
● M1, M2 can use as manual skyshot mode by setting the user function mode.
■ ■ ■ ■ ■ Double Exposure
From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image). ∗
1
• Front Side of Original
• Original Size:
Free, maximum Invoice size
• Opening the ADF
• Fit original to the Original
Guide.
Back Side
of Original
NOTE:
When opening the Platen Cover, or ADF
● An incorrect position detection of the
original may occur when a strong light
shines on the glass during this mode.
● An incorrect exposure may occur when
there is a Black line at the edge of the
original, or an image which the machine
interprets as a Black Pattern in this mode.
● The final copy may be affected if colored
background original(s) do not have a
White edge, or if it is less than 2 mm wide.
∗
1 When selecting the Double Exposure, it
will be displayed as "2 in 1" at Job
Settings, and "N in 1" of Function Select
Key will also be displayed.
∗
2 Double Exposure function set by M5 key is
unable to store with other Job Memory.
Original Size:
ABC ABC
DEF
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to "Off" in the
Copier Settings "16 Double Exposure". (See
page 75)
Original Guide
∗
2
Front Side
Image
Back Side
Image
Copy Size: Letter-R Ex: Invoice-R
1 2
1 2
5 6