Panasonic DP-8032 - Manual (Page 74)

74
Function
■ ■ ■ ■ ■ GENERAL SETTINGS
Screen
No.
00 Power On Default Mode Selects mode. COPY
● COPY, FAX, PRINTER, SCANNER
01 Manual Copy Quality Adj Sets to activate the manual density control. Off
● Off, On
02 Manual Add Toner Adds toner manually. Off
● Off, On
03 Sort Memory Status Indicates the sorting memory status. Off
● Off, On
04 Departmental Counter Indicates the department counter. Consult with an
authorized service
provider
05 Data Security Kit Info. Indicates the Data Security Kit version, and
Security setting of the machine, when the
Security Kit is installed.
09 Key Operator Mode Input the Key Operator Password.
Modes Function
Initial
Setting
01/02
02/02
■ ■ ■ ■ ■ COPIER SETTINGS
Screen
No.
00 Margin Value Default Selects the margin shift value. 10 mm
● 5 mm, 10 mm, 15 mm, 20 mm
01 Edge Value Default Selects the edge width. 5 mm
● 5 mm, 10 mm, 15 mm, 20 mm
02 Book Value Default Selects the book void width. 20 mm
● 15 mm, 20 mm, 25 mm, 30 mm
03 Margin Reduction Def. Selects the reduction ratio in margin mode. No
● No, Yes
04 2-Sided Mode Default Function sets the duplex priority mode. No
● No, 1 to 2, 2 to 2, B (Book) to 2
05 N in 1 Default Mode Selects the N in 1 default mode 2 in 1
● 2 in 1, 4 in 1, 6 in 1
06 Reduce N in 1 For Space Selects whether to disable edge deletion No
● No, Yes
07 Booklet Default Mag. Selects the booklet magnification Reduce
● 100%, Reduce
08 Digital Skyshot Mode Enables or disables the use of Skyshot mode. Normal
● No, Normal, Quality
09 Manual Skyshot Mode Enables or disables the use of Manual Skyshot. Off
● Off, M1, On, M2, On, M1, M2, On
Modes Function
Initial
Setting
01/04
02/04