Panasonic DP-8032 - Manual (Page 83)

83
Function
Screen
No.
Modes Function
Initial
Setting
01/03
02/03
03/03
NOTE
● The Key Operator Password is required before any changes can be made to items on this
page.
∗
Functions 04, 09, and 10 are available when optional Hard Disk Drive (DA-HD31) is
installed.
∗∗
When function No. 12 is set, or No. 4 is change, cycle the power by turning the Power
Switch on the Left Side of the machine OFF and ON.
∗∗∗
When available with optional PS.
■ ■ ■ ■ ■ PRINTER SETTINGS
00 Printer Settings Print Sets the printer status printout. Start
● Stop, Start
01 Job Completion Time Sets the job completion time setting. 180
● 1~ 999 sec.
02 Page Protection Compress automatically then printout. Off
● Off, On
03 Error Page Print Sets the error page printout. On
● Off, On
04 Spool Function Sets the spool function.∗∗ On
● Off, On
05 Text Print Prints text page only. On
● Off, On
06 PS Configuration Print Sets the status page print of PS. Start
● Stop, Start
07 Font List Print (PCL) Sets the font list print of PCL. Start
● Stop, Start
08 Font List Print (PS) Sets the font list of PS. Start
● Stop, Start
09 Mailbox Data Holding Sets the automatic holding function of mailbox 7 days
data.∗
● Infinity, 1 day, 2 days, 3 days, 4 days, 5 days,
6 days, 7 days
10 Delete Mailbox Data Sets delete the mailbox data.∗ Before
● All, Before
11 Print Queue Delete Sets authorization to delete the print queue. Key Op.
● Free, Key Op. (operator)
12 AppleTalk Zone Name∗∗∗ Inputs an AppleTalk Zone name.∗∗
● Maximum 32 characters