Panasonic DP-C354 - Manual (Page 118)

118
Cha
pter 5 Internet F
ax
Setting From field
The From field is preset in the Machine, you can change the From field by selecting “From” on the
Email screen. To set From field, follow the steps below:
If “145 Sender Selection” is set to “Valid”, you can preset up to 25 sender names. You can select from
the sender list when sending an Email. However, if you select “From” on the Email screen, the sender
list will not be displayed.
For more details on this setting, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
1
On the Email screen, select “From”.
(See page 107, and 116)
2
Enter a sender name, or select a
sender Email Address, and then select
“Close”.
3
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts email transmission.
z When “145 Sender Selection” is set to
“Valid”, and if you do not select “From“, the
Sender Selection List will be display after
pressing the Start key. Select a Sender, and
then select “OK”.