Philips LC4242 - Manual (Page 12)

Connecting to video equipment
General
–
The figures in brackets (1) correspond to the figures in the
accessories diagram.
The characters in brackets (a) correspond to the characters in
fig. 2 of ‘Controls and connections’.
Caution!
Always switch off the projector before making any connections.
PAL, NTSC, SECAM
1. Connect the video OUT socket of a VCR, Laser Disc player,
video camera or TV to the VIDEO IN socket (e) of the
projector.
For this, use the video/audio connection cable
(2) supplied.
2. Connect the audio OUT L/R sockets of the VCR, Laser Disc
player, video camera or TV to the AUDIO L/R sockets (f) of
the projector.
For this, use video/audio connection cable
(2) supplied.
Insert the white plug into the L socket and the red plug into
the R socket.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector (depending on region):
1. Connect the Scart/RCA Audio Video adapter (3) supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2. Plug the video/audio connection cable (2) supplied into both
the adapter and the Video in (e) and Audio L/R sockets (f) of
the projector.
S-VHS
1. Connect the S-video OUT socket of a S-VHS video recorder,
Laser Disc player, video camera or TV to the S-video IN
socket
(d) of the projector.
For this use an (optional) S-video connection cable.
2. Connect the audio OUT L/R sockets of the S-VHS video
recorder, Laser Disc player, video camera or TV to the AUDIO
L/R sockets
(f) of the projector.
For this, use the red and white audio connectors of the
audio/video connection cable.
Insert the white plug into the L socket and the red plug into
the R socket.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector (depending on region):
1. Connect the Scart/RCA Audio Video adapter (3) supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2. Plug the audio/video connection cable supplied into both the
adapter and the Audio L/R sockets (f) of the projector.
Insert the white plug into the L socket and the red plug into
the R socket.
3. Plug an (optional) S-Video connection cable into the VCR and
the S-VIDEO in socket (d) of the projector.
Data in
S-Video in Video in Audio
Audio
L R
Data in
S-Video in Video in Audio
Audio
L R Power
Data
Audio Video
out out
L Audio R out S-Video S-Video L Audio R out VCR Video out Video out
Projector
Data
USB in USB out USB in USB out
Data in
S-Video in Video in Audio
Audio
L R
Data in
S-Video in Video in Audio
Audio
L R Power Audio Video
out out
L Audio R out Video out L Audio R out Video out VCR
Projector
Data
USB in USB out USB in USB out
7. Installation
12
Scart adapter
(depending on
region)
(e) (f)
(2)
(3)
S-Video
Scart adapter
(depending on
region)
(d) (f)
(optional) (2)
(3)
Connecting to video equipment