Panasonic KX-TG6502 - Manual (Page 12)

12
Installation
Connecting the AC Adaptor
Base unit
• Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using the Panasonic KX-J66 T-adaptor, or using the Panasonic Battery Back-Up
Power Supply KX-TCA200.
Charger unit (KX-TG6502 only)
• Charger unit: USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No.
KX-TCA1-G).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
AC Adaptor
for Base Unit
Power Outlet (AC 120 V, 60 Hz)
Fasten the AC adaptor cord.
Hook
Raise the antennas.
Bottom of the base unit
AC Adaptor
Power Outlet
(AC 120 V, 60 Hz)
TG6500.book Page 12 Friday, June 25, 2004 6:56 PM