Installing the battery in the handset, Battery charge, Battery strength – Panasonic KX-TG6502 User Manual
Page 16: R (p. 16), Battery (p. 16), Cator (p. 16), Charge indicator (p. 13), P. 16), Strength (p. 16), Installation
Installation
16
Installing the Battery in the Handset
Insert the battery (
1), and press it down until it snaps into the compartment (2).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 17). Close the cover and charge the handset for 6
hours.
Battery Charge
Place the handsets on the base
unit and charger for 6 hours
before initial use.
• The unit beeps once, the CHARGE
indicator lights and “Charging” is
displayed.
• When the battery is fully charged,
“Charge completed” is displayed if
there are no new calls in the Caller
List.
Battery strength
You can confirm the battery
strength on the handset
display.
Battery strength is indicated
by the icons shown in the
chart to the right.
Display prompt
Battery strength
1
Fully charged
2
Medium
3
Low
(flashing)
Needs to be recharged.
4
Discharged
1
2
CHARGE Indicator
(KX-TG6502 only)
AND
3
TG6500.book Page 16 Friday, June 25, 2004 6:56 PM