Programmable settings, Programming guidelines, How to select a function item from the menu – Panasonic KX-TG6502 User Manual
Page 18: 1 press [menu, 2 scroll to the desired item by pressing [d] or [b, Ringer setting, 3 press the soft key () to select the desired item, 6 press [off] to exit programming mode, P. 18, P. 18)
18
Programmable Settings
Programming Guidelines
The unit has several programmable functions which can be selected from the
function menu on the display (p. 19).
How to select a function item from the menu
• To go back to the previous menu, press the soft key (
), or press the soft key
(
) while “---(Go back)----” is displayed. If you press this key in the
main menu, the unit will exit programming mode.
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table on page 19.)
• You can exit programming mode at any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the unit will exit programming mode.
• If the unit detects a problem, an error message will be displayed (p. 92–94) and/or
error beeps will sound.
Make sure the handset and base unit are not being used. The handset
must be operated near the base unit and while off the base unit or charger.
1
Press [MENU].
• The main menu is displayed (p. 19).
2
Scroll to the desired item by pressing [d] or
[B].
3
Press the soft key (
) to select the desired item.
4
If the item has a sub-menu, select the menu item (p. 19).
Repeat steps 2 and 3 until the desired item is displayed.
If the item has no sub-menu, go to step 5.
5
Select the desired setting by pressing [d] or
[B], then press the soft key (
).
• A confirmation tone will be heard and the setting
will be saved.
6
Press
[OFF] to exit programming mode.
Handset
SAVE
SAVE
BACK
BACK
SAVE
[OFF] exits
programming.
Navigator key scrolls
through the menu.
[MENU] enters the
function menu.
The soft key works as
the or key.
The soft key works
as the key.
BACK
SAVE
SELECT
The soft key works
as the
key.
BACK
Navigator key scrolls
through the menu.
The soft key works as
the
or
key.
SELECT
SAVE
[OFF] exits
programming.
[MENU] enters the
function menu.
B
Ringer setting
d
BACK
PLAY
SELECT
SELECT
SAVE
dB
BACK
PLAY
SAVE
BACK
SELECT
TG6500.book Page 18 Friday, June 25, 2004 6:56 PM