Panasonic CT 36HX41 - Manual (Page 11)

10
I NSTALLATION
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment, connect the PROG OUT and TO
AUDIO AMP connections on the back of the television.
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
3. See optional equipment manual for further instructions for recording and monitoring.
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected
to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must
be connected to the component video inputs (Y, P
B
, P
R
) of the television. A DTV
signal must be available in your area. Select the output of the STB to either 1080i or
480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC
signal and progressively scans the image. This allows you to sit close to the TV and
not see the thin black horizontal lines (venetian blind effect) associated with interlaced
TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD
Player to the back of your TV.
Note: There are 2 sets of three video inputs, Y, P
B
, and P
R
. Separate component color
inputs provide luminance and color separation. Use the L (left) and R (right) audio
inputs.
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
DIGITAL TV OUTPUT
P
R
P
B
Y MAIN
VIDEO
NTSC OUTPUT
R-AUDIO-L S-VIDEO
L
-AUDI
O
-R
-VIDEO
DTV INPUT TERMINALS ON BACK OF TV
VIDEO
S-VIDEO
INPUT
1
CENTER CHANNEL
INPUT
PROG OUT
DIGITAL TV INPUT
L
R
TO AUDIO
AMP
INPUT
2
INPUT
3
L
R
AUDIO
VIDEO
L
R
AUDIO
Y
P
B
P
R
1 2
ANT 1
SPLIT OUT
ANT 2
CABLES NOT SUPPLIED