Panasonic DMP-BD871 - Manual (Page 23)

23
VQT3V18
Setup menu
Change the unit’s settings if necessary. The settings
remain intact even if you switch the unit to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
Home menu.
Please refer to page 15 for details about user
registration and switching.
1
While displaying the HOME menu, press
[SETTINGS].
2
Select an item and change the settings.
To exit the screen
Press [EXIT].
∫ Picture Mode ( > 22)
∫ Picture Adjustment ( > 22)
∫ HDMI Output
Press [OK] to show the following settings:
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “
¢”. When any item
without “ ¢” is selected, the images may be distorted.
≥ If “Auto” is selected, the best suited output
resolution to the connected television is
automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting
1080/24p output using an HDMI cable, movies and
other material recorded at 24p are output at 24p.
≥ When BD-Video images other than 24p are
played, images are output at 60p.
≥ 24p : A progressive image recorded at a rate of 24
frames per second (motion-picture film). Many
BD-Video movie contents are recorded in 24 frames/
second in accordance with the film materials.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color output when a television that supports
Deep Color is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
∫ Black Level Control
Select lighter or darker for adjusting the black
level to the desired setting for picture
enhancement.
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥ Not making the proper settings may result in noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
Video
OK
RETURN
Player Settings
System
Ratings
Network
Language
Audio
Video
Black Level Control
HDMI Output
Picture Adjustment
Picture Mode
Lighter
Normal
Audio
S
e
tt
ings
DMP-BD87_77_VQT3V18_eng.book 23 ページ ２０１１年１２月２２日 木曜日 午後８時１９分