Panasonic KX-TG1063 - Manual (Page 38)

Intercom/Locator
38 For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between the base unit and handset
– between handsets
Note:
L
If you receive an outside call while talking on the
intercom, you hear 2 tones.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
{
SP-PHONE} 2 times.
– To answer the call with the handset, press
{ OFF}, then press {C}.
L
When paging unit(s), the paged unit(s) beeps for
1 minute.
Making an intercom call
1 Proceed with the desired operation.
■ When 1 handset is registered:
Press {INTERCOM}.
■ When 2 or more handsets are registered:
Press {INTERCOM}.
– To page a specific handset, enter the
handset number.
– To page all handsets, press {0} or wait for
a few seconds.
L Lift the corded handset if needed.
L
To stop paging, press {INTERCOM}.
2 When you finish talking, press {INTERCOM}
or place the corded handset on the cradle.
1
{ MENU} i {#}{2}{7}{4}
2 To page the base unit, press {0}.
To page another handset, enter its extension
number.
L
To stop paging, press {OFF}.
3 When you finish talking, press {OFF}.
Answering an intercom call
1 Lift the corded handset or press {INTERCOM}
to answer the page.
2 When you finish talking, place the corded
handset on the cradle or press {INTERCOM}.
1 Press {C} to answer the page.
2 When you finish talking, press {OFF}.
Handset locator
You can locate a misplaced handset by paging it.
1 Base unit:
{LOCATOR}
L
All registered handsets beep for 1 minute.
2 To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
Press {C}, then press {OFF}.
Transferring calls,
conference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
– between the base unit and handset
– between 2 handsets
1 Proceed with the desired operation.
■ When 1 handset is registered:
During an outside call, press {INTERCOM}.
■ When 2 or more handsets are registered:
During an outside call, press {INTERCOM}.
– To page a specific handset, enter the
handset number.
– To page all handsets, press {0} or wait for
a few seconds.
= Base unit
Y Handset
= Base unit
Y Handset
= Base unit
TG106x(e).book Page 38 Friday, January 16, 2009 10:45 AM