Panasonic KX-TG1063 - Manual (Page 8)

Getting started
8 For assistance, please visit http://www.panasonic.com/help
Setting up
Connections
L
Use only the supplied Panasonic AC adaptor
PQLV219.
■ Base unit
*For DSL/ADSL service users
■ Charger
Battery installation
L USE ONLY Ni-MH batteries AAA (R03) size.
L
Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Important:
L
If the handset does not automatically turn on
after installing/replacing batteries, place the
handset on the charger.
Battery charge
Charge for about 7 hours.
L
When the batteries are fully charged, the charge
indicator goes off.
(120 V AC, 60 Hz)
Hooks
Rechargeable Ni-MH ONLY
Confirm “Charging”
is displayed.
TG106x(e).book Page 8 Friday, January 16, 2009 10:45 AM