Panasonic SC-HT900 - Manual (Page 10)

10
RQT6750
S
imple
set
up
Do not;
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
STEP
4
Connecting the subwoofer, antennas, and AC power supply cord
TV
AUDIO
IN
VCR
AUDIO
IN
AUX LINE
OUT COMPO
S-VIDEO
OUT
VIDEO
OUT VIDEO
P B
P R
OPTICAL
IN
AM ANT FM ANT
EXT LOOP 75 h GND
L
R
A
1 L
3 L
2 R
4
5
R
A
VOLT ADJ
127 V 110 V 220 V-230 V 240 V
1
2
System cable AM loop
antenna FM indoor
antenna AC power supply cord
Subwoofer
Adhesive tape
Fix the other end of the antenna
where reception is best.
AM loop antenna
Click! Stand the antenna up on
its base.
Keep loose antenna cord
away from other wires and
cords.
System cable
Catch to the right
To household AC outlet
FM indoor antenna
Catch up
To disconnect
Press the catch
and pull out.
Connect the AC power supply cord after
all other connections are complete.
To disconnect
Press the catch
and pull out.
[For\areas\except\U.S.A.\and\Canada]
If the power plug will not fit your AC outlet
Use the power plug adaptor (included).
If it still doesn’t fit, contact an electrical parts distributor
for assistance.
Power plug adaptor
[For\U.S.A.\and\Canada] [For\others] [For\areas\except\U.S.A.\and\Canada]
[For\areas\except\U.S.A.\and\Canada]
Before connecting the AC
power supply cord
Set the voltage.
(Back of subwoofer)
Use a flat-head screwdriver to turn
the voltage selector on the back of
the subwoofer to the appropriate
position for the area in which this
system is used.
If the power supply in your area is
115 V or 120 V, please set the
voltage selector as follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
AC power supply cord
Conserving power
The unit consumes power (For U.S.A. and Canada: approx. 0.5 W or for
units with PX printed on the outer packaging and Latin America: approx.
0.9 W) even when it is turned off with [
Í]. To save power when the unit is
not to be used for a long time, unplug it from the household AC outlet.
Remember to reset the radio stations and any other memory items
before using the unit again.
Information you enter into the unit’s memory remains intact for up to
2 weeks after the AC power supply cord is disconnected.
STEP
5
The remote control
R6/LR6, AA, UM-3
1
2
3
3
+
-
+ -
Remote control Batteries
≥Insert so the poles (i and
j) match those in the
remote control.
≥Do not use rechargeable
type batteries.