Parental rating, View subtitles, Analogue channels – Philips 46PFL66X6H User Manual

Page 32: Digital channels, Subtitle language, View scenea, What you can do, What you need, Switch on, Set tv wallpaper

Advertising
background image


EN 32

Parental rating

Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with
age ratings lower than your child's age.
1. Press .

2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Child lock] > [Parental rating].
A message prompts you to enter the child
lock code.

4. Enter the child lock code with the

Numeric buttons.
5. Select an age rating, then press OK.
All programmes above the selected age
rating are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock (Page

31

).

View subtitles

Analogue channels

1. Switch the TV to an analogue TV channel.

2. Press TEXT.
3. Enter the three-digit page number of the
subtitles page (usually '888').
4. Press to exit teletext.
Subtitles display if available.

Digital channels

1. Press OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[On during mute], then press OK.
Note:

If MHEG application is activated,
subtitles are not displayed.

If you select [On during mute],
subtitles are displayed only when you
press to mute the sound.

Subtitle language

You can change the subtitle language on
some digital channels.
1. Press .

2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Subtitle language].
3. Select [Primary subtitles] or [Secondary
subtitles] for the preferred language.
4. Press OK to confirm.
Tip: You can also press OPTIONS >
[Subtitle language].

View Scenea

What you can do

You can display a default picture as the
wallpaper on your TV. You can also load
another picture as the wallpaper.
If the sleeptimer is off, the wallpaper is
displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleeptimer.

What you need

To use another picture as the wallpaper, you
need a USB storage device that contains a
picture that is less than 1 MB in size.

Switch on

1. Press .

2. Select [Scenea], then press OK.
The default picture is displayed.
Note: The wallpaper is displayed for the
duration of the sleeptimer. For more

information on sleeptimer, see Use more of

your TV > Set locks and timers >
Sleeptimer (Page

31

).

Set TV wallpaper

You can load another picture as the
wallpaper.
Note: Loading a new picture overrides the
existing picture.

Advertising