Philips CD485 - Manual (Page 12)

12 EN
Install the handset
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
• Use only the supplied batteries.
• Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
• Charge the batteries for 8 hours before first use.
Warning
• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may
damage the product.
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Set the country/language
Select your country/language, then press [OK]
to confirm.
» The country/language setting is saved.
Note
• The country/language setting option is country
dependent. If no welcome message is displayed,
it means the country/language setting is preset
for your country. Then you can set the date and
time.
Set the date and time
1
Select [Menu] > > [Date & time], then
press [OK] to confirm.
2
Select [Set date]/[Set time], then press
[OK] to confirm.
3
Press the numeric buttons to enter the
date and time.
Note
• If the time is in 12-hour format, press 3 / 4 to
select [AM] or [PM].
4
Press [OK] to confirm.
Set the date and time format
1
Select [Menu] > > [Date & time], then
press [OK] to confirm.
2
Select [Date format] or [Time format].
3
Press
3
/ 4 to select [DD-MM-YYYY]
or [MM-DD-YYYY] as the date display,
and [12 Hours] or [24 Hours] as the time
display. Then press [OK] to confirm.
» The setting is saved.
Note
• The date and time format setting is country
dependent.