Panasonic PV-DF273 - Manual (Page 28)

28 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 28 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording
Press PROG to end
the program.
To Enter More
Programs,
press
to select
and SET to set a
blank program
number, and then
repeat step 3.
Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it is tuned
to the desired channel and the power is left on for
timer recording.
• PROG TIMER Indicator lights up on the unit.
You can set up to 8 programs to be recorded while you
are away.
1
2
3
Press PROG* to display SET PROGRAM
screen.
1) Press to select
TIMER
PROGRAMMING.
2) Press SET to
display screen.
• If a program is already in memory, press , and
SET to select an unused program number.
Press to select
and SET or to set
the recording DATE.
• 1~31 = One time
• DAILY = MON~FRI
• WEEKLY SUN~SAT
= Same time once a week
Repeat step 3 to set:
• Start time, Stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP)
Today’s
Date
Example
4
5
DAILY 7
2 1 31 6 8 9
SELECT / Selection Order
WEEKLY
(SAT)
WEEKLY
(MON)
WEEKLY
(SUN)
CANCEL : ADD / DLT
SELECT 1 - 8 :
ENTER : SET
END : PROG
P DT START STOP CH SPD
1 day 9 : 00 p 12 : 00a 08 SP
2 -- -- : -- -- : -- -- --
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- --
SET : SET
SELECT :
END : PROG
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
S LEEP T I MER : 00
SELE CT START DATE
7 FR I --:-- --:-- --
TODAY
DATE START STOP CH
SP
SELECT :
SET : SET
END : PROG
- - - - - - - - -- - - - - - - -- - - - - - -
PROG TIMER Indicator
Cable or antenna is connected.
Power cord is plugged in.
The clock is set to correct time.
The tape is long enough.
The record tab is in place.
Check List