Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 28)

- 20 -
Chapter 4 Menu-Driven Console Management
The Switch provides a menu-driven console interface for configuration purposes. The Switch can be
configured either locally through its RS-232 port or remotely via a Telnet session. This chapter
describes how to configure the Switch using its menu-driven console. The figures in this chapter will
base on WGSW-2402A, for WGSW-404, however, the setup steps are the same.
4.1 Logging on to the Switch
Enter the console interface factory default console name “admin” without password (or enter a
user-defined pass-word if you changed the factory default password). The Switch Management screen
in Figure 4-1 appears, with the Basic option highlighted.
Note: Only one console and three telnet-users can log on to the Switch concurrently. However, it is
not recommended that multiple users modify the configuration at the same time.
F IGURE 4-1 S WITCH M ANAGEMENT S CREEN
To perform basic management activities, see Section 4.3 “Performing Basic Management
Activities ”.
To perform advanced management activities, see Section 5 “Performing Advanced Management
Activities ”.