Nokia BH-221 - Manual (Page 6)

Next setting.
Previous setting.
The item is selected.
The item is not selected.
Wear the headset
Connect the headphones to the headphones connector.
The headset is provided with different-sized rubber earpieces. Select the ones that
fit you best.
The earpiece marked L goes in your left ear and the one marked R in your right.
Gently put the earpieces into your ears, and fit them properly for a good in-ear seal.
You can clip the headset to your clothing. To see the display better, rotate the clip.
Pair the device
Pair and connect the headset
You can control which devices are allowed to connect to your headset.
Before using the headset with a compatible device for the first time, you must pair
and connect them.
Pair the headset manually for the first time
1 Make sure the headset is switched off.
2 Switch the compatible device on, then switch its Bluetooth on.
3 Switch the headset on.
4 Set your device to search for Bluetooth devices. For details, see the user guide
of the device.
5 On your device, select the headset from the list of found devices.
6 If asked, type in the passcode 0000.
If your device doesn't find the headset, make sure pairing mode is switched on.
Switch pairing mode on
1 Press and at the same time.
2 Press , then select
Switch headset discoverable for pairing new devices .
In some devices, you may need to connect separately after pairing.
6