Nokia BH-100 - Manual (Page 6)

ENGLISH
Pair the headset
1. Ensure that your phone is switched
on and the headset is switched off.
2. Press and hold the power key until
the green indicator light starts to
flash quickly.
3. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.
4. Select the headset from the list of
found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
separately after pairing. You only
need to pair the headset with your
phone once.
If the pairing is successful, the
headset beeps and appears in the
phone menu where you can view the
currently paired Bluetooth devices.
The headset is now ready for use.
Basic use
Place the headset on the ear
The headset has an earloop attached
around it. To use the headset without
placing the earloop over the ear, plug
the earpiece into your ear.
To use the headset with the earloop on
the right ear, detach the earloop from
the right of the headset (8) when the
back of the headset is facing you; to
use the headset on the left ear, detach
the earloop from the left. Slide the
earloop behind your ear (9), and point
the headset toward your mouth (10).