NordicTrack Audiostrider NTEL7506.2 - Manual (Page 10)

10
11. Orient a Pedal Arm (32) as shown. Attach the
Left Pedal (34) to the Pedal Arm with three M8 x
40mm Button Screws (90), three M8 Split
Washers (97), and three M8 x 23mm Washers
(31).
Next, attach a Pedal Arm Cover (39) to the Pedal
Arm (32) with a #8 x 3/4" Screw (78).
Repeat this step for the Right Pedal (not
shown) and the other Pedal Arm (not shown).
11
34
78
31
31
97
97
90
32
39
10. While another person holds the Console (11)
near the Upright (10), connect the console wire
harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with
four #8 x 3/4" Screws (78); start all four
Screws and then tighten them. Avoid pinch-
ing the wire harnesses during this step.
10
78
65
Console Wire
Harness
11
Avoid pinching the
wire harnesses
during this step
10