Olympus SP-310 - Manual (Page 76)

Changing the monitor display (y)
76
5
Ad
dit
io
n
al sh
o
o
ti
ng
fu
ncti
on
s
1
Press the DISP./GUIDE button repeatedly.
• Press the DISP./GUIDE button to change the display in the following order.
g“Direct buttons” (P. 12)
This displays the histogram. You can take pictures while checking the contrast of the
subject, thereby enabling you to closely control the exposure.
TIPS
• Information is displayed on the monitor when the display is changed or menu
operations are performed. For details about displayed information, refer to
“Monitor Symbols & icons” in the “Basic Manual”.
Histogram
OFF The histogram is not displayed.
ON The histogram is displayed.
DIRECT Displays the black and white areas directly on the picture.
When [DIRECT] is enabled, the histogram in playback mode is also
displayed directly on the picture.
Displays the regular shooting information. Displays only the AF target mark.
Displays a histogram
showing the luminance
distribution of the
picture.
This screen is not
displayed in
n mode.
This screen is not
displayed if [u] is
[OFF].
Displays lines. The lines
displayed will change
depending on the
[FRAME ASSIST]
setting.
This screen is not
displayed in n mode.
This screen is not
displayed if [FRAME
ASSIST] is [OFF].
44
1600 1600 × 1200 1200 SQ1 SQ1
0.0 0.0 F4.0 F4.0 1/200 1/200
44
0.0 0.0 F4.0 F4.0 1/200 1/200
44
1600 1600×1200 1200 SQ1 SQ1
0.0 0.0 F4.0 F4.0 1/200 1/200
The monitor turns off.