Asus T3-P5G43 - Manual (Page 59)

4-5 ASUS T-P5G43
4.4 Connectors
This section describes and illustrates the connectors on the motherboard.
1. CPU fan connector (4-pin CPU_FAN)
The fan connector supports the proprietary CPU fan. Connect the fan cable
to the fan connector on the motherboard, ensuring that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cable to the fan connector. Insufficient air flow
within the system may damage the motherboard components. These are not
jumpers! DO NOT place jumper caps on the fan connectors!
P5Q18L
CPU_FAN
CPU
FA
N PW
M
CPU F
AN IN
CPU
FA
N PWR
GND
P5Q18L CPU fan connector
2. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for the 24-pin and 4-pin power plugs from the power
supply unit. The plugs from the power supply unit are designed to fit these
connectors in only one orientation. Find the proper orientation and push down
firmly until the connectors completely fit.
Do not forget to connect the 4-pin ATX12V power plug to the ATX12V connector
on the motherboard. Otherwise, the system will not boot up.
P5Q18L
P5Q18L ATX power connectors
EATXPWR
PIN
1
+3 Volt
s
-12 Volt
s
GND
PSON#
GND GND GND
-5 Volt
s
+5 Volt
s
+5 Volt
s
+5 Volt
s
GND
+3 Volt
s
+3 Volt
s
GND +5 Volt
s
GND +5 Volt
s
GND Power OK +5V Standby +12 Volt
s
+12 Volt
s
+3 Volt
s
ATX12V
PIN 1
+12V DC
+12V DC GND
GND