Grasp starter cord handle. see figure 27, A. pull rope out slowly until you feel drag, B. next, pull rope with one rapid full arm stroke – Tecumseh H30-40 User Manual

Page 13: C. return rope slowly to original position, When engine starts, B. next, move choke control to “no choke” position, No choke position, 1/2 choke position, Full choke position, Figure 26. choke control positions

Advertising
Grasp starter cord handle. see figure 27, A. pull rope out slowly until you feel drag, B. next, pull rope with one rapid full arm stroke | C. return rope slowly to original position, When engine starts, B. next, move choke control to “no choke” position, No choke position, 1/2 choke position, Full choke position, Figure 26. choke control positions | Tecumseh H30-40 User Manual | Page 13 / 24 Grasp starter cord handle. see figure 27, A. pull rope out slowly until you feel drag, B. next, pull rope with one rapid full arm stroke | C. return rope slowly to original position, When engine starts, B. next, move choke control to “no choke” position, No choke position, 1/2 choke position, Full choke position, Figure 26. choke control positions | Tecumseh H30-40 User Manual | Page 13 / 24
Advertising
See also other documents in the category Tecumseh Faxes: