Regular maintenance – Toshiba e-studio 5520C User Manual

Page 110

Advertising
background image

8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT

108 Regular Maintenance

Regular Maintenance

We recommend that you clean the following portions weekly so that the originals can always be scanned in unsoiled
conditions.

y

Be careful not to scratch the portions when cleaning them.

y

When cleaning the surface of the equipment, do not use such organic solvents as thinner or benzine.

- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, follow the instruction.

1. Scanning area (surface of the long rectangular glass)

Wipe it with the accessory cloth or a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft
cloth which has been moistened with water and then squeezed well. Do not use liquids other than water (such as
alcohol, organic solvents or neutral detergent).

2. Original glass

Wipe it with the accessory cloth or a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft
cloth which has been moistened with water and then squeezed well. Do not use liquids other than water (such as
alcohol, organic solvents or neutral detergent).

3. Guide

Clean the surface as follows depending on the extent of the staining.

- Clean it with a soft cloth.
- Clean it with a soft cloth lightly moistened with water.
- Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
- Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with

water, and then wipe with a dry cloth.

4. Platen sheet

Clean the surface as follows depending on the extent of the staining.

- Clean it with a soft cloth.
- Clean it with a soft cloth lightly moistened with water.
- Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
- Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with

water, and then wipe with a dry cloth.

3

4

1

2

Advertising
This manual is related to the following products: