Toshiba e-studio 5520C - Manual (Page 20)

1 TROUBLESHOOTING FOR THE HARDWARE
18 Clearing a Paper Jam
5 Close the drawer and the paper feed cover.
„ Paper jam in the bypass tray
„ Paper jam in the right side of the equipment
Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
‰ Transport unit
6 Connect the External Large Capacity Feeder (if
attached, optional) to the equipment.
Move it slowly placing your hands on the point shown in the figure.
1 Pull out the jammed paper in the bypass tray.
1 Pull out the duplexing unit.
Grasp the lever of the duplexing unit and pull it until it stops.
Be careful not to touch the slide rails (A in the figure).
This could injure you.
A
A