Paper jam in the bridge unit, T ( p.32), P.32 “paper jam in the bridge unit – Toshiba e-studio 5520C User Manual
Page 34
1 TROUBLESHOOTING FOR THE HARDWARE
32 Clearing a Paper Jam
Paper jam in the bridge unit
Do not touch the metal parts or motors of the bridge unit.
You could be burned or the shock could cause an injury to your hand.
Remove the jammed paper from the bridge unit after clearing all the other jams.
You must remove other jammed paper from the equipment before clearing paper from the bridge unit. Pulling the
bridge unit off the equipment without removing the jammed paper may cause the paper to be torn and left inside the
equipment.
1
Open the front cover of the equipment.
2
Grasping the lever, pull out the bridge unit until it
stops.
3
Open the upper cover.
4
Remove the jammed paper from the top of the bridge
unit.
1) Turn the knob to the left or right.
2) Remove the jammed paper.