Toshiba e-studio 5520C - Manual (Page 45)

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 43
1 TROUBLESHOOTING FOR THE HARDWARE
8 Close the front cover of the Finisher.
„ Staple jam in the Saddle Stitch unit
5 Holding the knob, raise the guide, and return it to its
original position.
6 Remove the staples fallen between the staple
cartridge and the staple case or the ones in the staple
receiver.
7 Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket does not move.
Insert the cartridge until it is caught by the latch and secured with a
click.
1 Pull out the Saddle Stitch unit until it stops.