Toshiba TEC SL-9000 series - Manual (Page 11)

2-2
2. SPECIFICATION EM1-31064
2.2 OPTION
NOTES: 1. Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.
2. Order from TOSHIBA TEC Parts Center or purchase locally.
3. When purchasing memory modules locally, select one having the following specifica-
tions.
■ Maker: HITACHI Pseudo Static RAM (OP-9000-RAM-512KB)
HITACHI Static RAM (OP-9000-SRAM-512KB)
■ Type: HM658512ALP-8V80ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-
RAM-512KB)
HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-
SRAM-512KB)
4. The Memo PC board (Flash ROM type) is installed in the SL-9000N model as
standard.
2.2 OPTION
Option Name
LON
LON Connector
TM8P-88P Part No.
EAJ-0028001 See
Note 2
See
Note 2
See
Note 2
See
Note 1
See
Note 1
See
Note 1
See
Note 1
See
Note 1
and 3
See
Note 1
See
Note 1
Part No.
EAJ-0029001
Part No.
10319100003
OP-9000-IOEC-B
OP-9000-IOB
LON Terminal
Resistor 285D-8P
LON Cable
S-STLAN-2P
(200 m/roll)
External Connector
Box
I/O PC Board
OP-9000-IOCN-
TMCC TMCC Cable Kit
OP-9000-
PIGGYBACK
OP-9000-
PIGGYBACK-S/F
OP-9000-RAM-
512KB
OP-9000-SRAM-
512KB
OP-9000-
CASSETTE
OP-9000N-LAN
TMCC
MEMO PC Board
(SL-9000 only)
Memory Module
Label Cassette
10 Base T (LAN)
Interface Board
(SL-9000N only)
Description Source
Model No.
or Part No.
A modular connector used to connect scales
to each other in a LON configuration.
A modular resistor attached to the scales
connected at both ends of the LON
configuration.
An 8-pin telephone cable used with the LON
connectors attached to both ends of the
cable. This cable connects scales to each
other in a LON configuration.
A junction box to which the TMCC kit is
attached. It is also used with the RS-232
CL/CS kit.
An I/O board equipped with the TMCC
interface and PC-AT keyboard interface ports.
It is used to construct a TMCC system and
program PLU data, etc.
A cable kit for the TMCC interface
This board is used to expand the PLU
memory to 4MB by installing the memory
module.
DIP type PS-RAM to be installed on the
MEMO PC board (OP-9000-PIGGYBACK) for
memory expansion.
When expanding the memory, install the two
modules as one set.
DIP type S-RAM to be installed on the MEMO
PC board (OP-9000-PIGGYBACK-S/F) for
memory expansion.
When expanding the memory, install the two
modules as one set.
It is covenient to change several kinds of
labels.
This board enables the SL-9000N to be used
in a LAN network.