Opening the display, Turning on the power, Opening the display -3 turning on the power -3 – Toshiba Computer L300 User Manual

Page 51

Advertising
background image

User’s Manual

3-3

L300/L300D series

Opening the display

The display panel can be rotated in a wide range of angles for optimal

viewing.
To open the display, slide the latch to the right side and lift the panel up to

the best viewing angle.

Figure 3-3 Opening the display panel

Turning on the power

This section describes how to turn on the power

1. If the external diskette drive is connected, make sure it is empty. If a

diskette is in the drive, press the eject button and remove the diskette.

2. Open the display panel.
3. Press and hold the computer’s power button for two or three seconds.

Figure 3-4 Turning on the power

When you open the display, be sure to hold the base firmly and lift up the

monitor slowly.

After you turn on the power for the first time, do not turn it off until you have

set up the operating system (OS) and the OS has started up

.

Power button

Advertising