Toshiba M300 - Manual (Page 148)

8-14 User’s Manual
Optional Devices
Advanced Port Replicator IIl
In addition to the ports available on the computer, the Advanced Port
Replicator lll provides serial port and separate ports for PS/2 mouse and
PS/2 keyboard. The Advanced Port Replicator connects directly to the
docking interface on the underside of the computer. The AC adaptor
connects the Advanced Port Replicator to a power source.
The following ports and accessories are available on the Advanced Port
Replicator III.
■ RJ45 LAN jack
■ RJ11 Modem jack
■ External monitor port
■ Parallel port
■ Serial port
■ PS/2 mouse port
■ PS/2 keyboard port
■ DC IN 15V jack
■ Security lock slot
■ Audio line-in, line-out jacks
■ Universal Serial Bus 2.0 port (four)
■ i.LINK (IEEE 1394) port (This port is not supported by the computer).
■ DVI port (This port is not supported by the computer).
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures
.
■ You must connect the AC adaptor before you connect to an Advanced
Port Replicator III.
■ When an Advanced Port Replicator III is connected to the computer,
you can not use the following computer’s ports: Modem jack, LAN jack,
External monitor port.
■ The PORTÉGÉ M300 does not support the DVI and i.LINK ports on the
Advanced Port Replicator III.