Ii. oil cylinder bore, Remove spark plug, Grasp starter cord handle – Tecumseh OH195SA/OH195SP (OHSK50-75) User Manual

Page 27: C. proceed to step 7, Remove rag covering spark plug hole, Install spark plug, Iii. oil, Iv. battery, Figure 53. disconnecting/connecting spark plug, Figure 54. typical spark plug connection

Advertising
Ii. oil cylinder bore, Remove spark plug, Grasp starter cord handle | C. proceed to step 7, Remove rag covering spark plug hole, Install spark plug, Iii. oil, Iv. battery, Figure 53. disconnecting/connecting spark plug, Figure 54. typical spark plug connection | Tecumseh OH195SA/OH195SP (OHSK50-75) User Manual | Page 27 / 32 Ii. oil cylinder bore, Remove spark plug, Grasp starter cord handle | C. proceed to step 7, Remove rag covering spark plug hole, Install spark plug, Iii. oil, Iv. battery, Figure 53. disconnecting/connecting spark plug, Figure 54. typical spark plug connection | Tecumseh OH195SA/OH195SP (OHSK50-75) User Manual | Page 27 / 32
Advertising
This manual is related to the following products:
See also other documents in the category Tecumseh For the car: