Moving the computer, Moving the computer -21 – Toshiba U300 Series PSA50 YXT User Manual
Page 66
User’s Manual
4-21
Operating Basics
■
Remove the dust from the cooling vents on the Left side of the
computer regularly with a vacuum cleaner. Refer to Chapter 2,
,
.
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
■
Before moving the computer, it recommends changing the function of
TOSHIBA HDD Protection. Refer to the section,
, in this chapter.
■
Make sure all disk activity has ended before moving the computer.
Check the HDD indicator on the computer.
■
If a CD/DVD is in the drives, remove it. Also make sure the disc tray is
securely closed.
■
Turn off (shut down) the computer.
■
Disconnect the AC adaptor and all peripherals before moving the
computer.
■
Close the LCD display panel. Do not pick up the computer by its display
panel.
■
Before carrying your computer, shut down the computer, disconnect the
power cable and wait until the PC cools down. Failure to follow this
instruction could result in minor injury.
■
Always turn off the power when you move the computer. If the power
button has a lock, set it to the lock position. Also be careful not to
subject the computer to impact. Failure to follow this instruction could
result in damage to computer, computer failure or loss of data.
■
Never transport your computer with PC cards installed. This could
cause damage to your computer and/or PC card, resulting in product
failure.
■
Use the carrying case when transporting the computer.
■
When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.
■
Do not carry your computer by holding protruded portions.
Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.