Visioneer 1780 - Manual (Page 34)

24
C H A P T E R T H R E E
Storing Speed Dial Numbers
You can store Speed Dial numbers, when you dial by pressing only three keys.
Model FAX 1170 has 26 Speed Dial locations, Models FAX 1270, MFC 1770 and
MFC 1780 have 36. Even if you lose electrical power, numbers stored in memory
will not be lost.
1 Press Function , 4 , 2 . The screen prompts you to enter a location.
SPEED-DIAL? #
2 Use the keypad to enter a 2-digit location (01 - 26 or 36). The screen displays
your entry, then prompts you to enter the number you’re storing.
#05
ENTER & SET
3 Enter the number (up to 20 digits).
4 Press Set . The screen now prompts you to store a name with this number.
NAME:
5 Use the keypad to enter the name (up to 15 characters). You can use the
chart on page 21 to help you enter letters — OR — Press
Set and go to
Step 7 to store the number without a name.
6 Press Set .
7 The screen prompts you to select the type of number this is. Use or to
select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone number
CHAIN a number (usually an access code) for chain dialing.
8 Press Set .
9 Return to Step 2 to store another Speed Dial number — OR — Press Stop
to exit.
Speed Dialing
1 Pick up the handset — OR — Press Hook .
2 When you hear a dial tone, press Speed Dial , then press the two-digit
Speed Dial number.
3 If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to
hear you unless you pick up the handset.)