Visioneer 1780 - Manual (Page 52)

42
C H A P T E R S I X
One Touch Dialing
1 Pick up the handset — OR — Press Hook .
2 When you hear a dial tone, press the One Touch key of the location you want
to call.
3 If you pressed Hook to dial a voice call, pick up the handset when the other
party answers. (The speaker works only one way; the other party won’t be
able to hear you unless you pickup the handset.)
4 To hang up a voice call, replace the handset.
If you try to use a One Touch location with no number stored in it, you hear
a warning sound, and screen displays “NOT REGISTERED.” The display
returns to normal after 2 seconds.
Speed Dialing
1 Pick up the handset — OR — Press Hook .
2 When you hear a dial tone, press Speed Dial , then press the two-digit
Speed Dial number.
3 If you pressed Hook to dial a voice call, pick up the handset when the other
party answers. (The speaker works only one way; the other party won’t be
able to hear you unless you pickup the handset.)
4 To hang up a voice call, replace the handset.
Hold
1 Press Hold to put a call on Hold.
2 You can put down the handset without disconnecting the call.
3 Pick up the fax machine handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.
Pause
Press Redial/Pause to insert a 3.5 second pause between numbers.
See
Storing One
Touch Dial
Numbers
p. 22
See
Storing
Speed Dial
Numbers
p. 24