Visioneer 1780 - Manual (Page 71)

61
R E M O T E F A X O P T I O N S
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your fax machine stores the received fax in
memory, then dials the fax forwarding number you’ve programmed, and forwards
the fax message.
1 Press Function , 8 , 2 .
2 Press or until the screen displays
FAX FWD
3 Press Set . The screen prompts you to enter the number of the fax machine
where faxes will be forwarded.
FWD#:
ENTER & SET
4 Enter the forwarding number (up to 20 digits).
5 Press Set .
6 Press Stop to exit.
Remote Retrieval
You can call your machine from any fax machine using touch tone and use a
Remote Retrieval Access Code and other button presses to retrieve fax messages.
Changing Remote Retrieval Access
Code
Enter your Remote Retrieval Access Code when the fax machine picks up your
call, so you can access features remotely. The access code is preset to 1 5 9 ✳, but
you can change this.
1 Press Function , 8 , 3 .
2 Enter a three-digit number from 000 to 999, then . You must end the
Remote Access Code with . Do not use the same digits that appear in your
Remote Activation or Deactivation Code (page 53).
3 Press Set .
4 Press Stop to exit.