Visioneer 1780 - Manual (Page 72)

62
C H A P T E R E I G H T
Using Remote Retrieval Access Code
1 Dial your fax number from a touch tone phone.
2 When your fax machine answers and beeps, immediately enter your Remote
Retrieval Access Code (159✳).
3 Your fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
No beeps — no messages.
4 Your fax machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, your
machine hangs up. If you enter an invalid command, your machine beeps
three times.
5 Press 9 0 to reset your machine when you finish.
6 Hang up.
Remote Commands
Follow the commands below to access features remotely. When you call the fax
machine and enter your Remote Retrieval Access Code (159✳), the system will
signal you with two short beeps to enter a remote command.
Change Paging/Fax Forwarding Setting
Press 9 5 .
then to
Turn feature off — Press 1 .
Enter Fax Forwarding — Press 2 .
Enter Paging — Press 3 .
Program Fax Forward Number — Press 4 , then retrieve Memory Status
List (see page 64).
Confirm Fax Forward Number — Press 5 .
Turn Fax Storage ON — Press 6 .
Turn Fax Storage OFF — Press 7 .