Wireless communications, Wireless communications -34, Disconnecting the modular cable – Toshiba Tecra A10 User Manual

Page 122

Advertising
background image

4-34

User’s Manual

TECRA A10/S10/M10/SatellitePro S300

Disconnecting the modular cable

To disconnect the modular cable, follow the steps as detailed below:

1. Pinch the lever on the plug in the telephone jack and pull it out from

within the connector.

2. Pinch the lever on the plug in the computer’s modem jack and pull it out

from within the computer.

Wireless communications

The computer’s wireless communication function supports some wireless
communication devices.

Only some models are equipped with both Wireless LAN and Bluetooth
functions.

If you use a storage device such as an optical disc drive or hard disk drive
connected to a 16-bit PC Card, you might experience the following
problems with the operation of the modem:

The modem speed is slow or communication is periodically interrupted.

Skips or jumps may be noted in sound.

Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a
microwave oven or in areas subject to radio interference or magnetic
fields. Interference from a microwave oven or other source can disrupt
Wi-Fi or Bluetooth operation.

Turn all wireless functionalities off when near a person who may have a
cardiac pacemaker implant or other medical electric device. Radio
waves may affect pacemaker or medical device operation, possibly
resulting in serious injury. Follow the instruction of your medical device
when using any wireless functionality.

Always turn off wireless functionality if the computer is near automatic
control equipment or appliances such as automatic doors or fire
detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.

It may not be possible to make a network connection to a specified
network name using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all
computers connected to the same network in order to re-enable
network connections.
* Please be sure to use new network name.

Advertising
This manual is related to the following products: