Western Digital MY BOOK 3 - Manual (Page 14)

MY BOOK 3.0
USER MANUAL
GETTING STARTED – 11
Step 4. Connecting the Drive
Power Adapters
Note: The configuration of the power adapter may vary. Depending on your region,
you may need to change the power adapter, as illustrated below.
Connection Steps
To connect the My Book 3.0 drive, follow the steps below:
1. Connect the power cord to the My Book 3.0 drive.
2. Connect the power adapter to an electrical outlet.
3. Connect the USB 3.0 Micro-B connector to the My Book 3.0 drive.
Important: Before handling the hard drive or any other components, discharge static electricity by
touching the metal chassis of your computer or using an anti-static wrist strap.
EU/KO EU/KO US/JA/TW US/JA/TW
Installing Installing Removing Removing
2
3
1
4
.