Keypad character assignment – Xerox M15 User Manual
Page 52
Page 3-12
Xerox WorkCentre M15/M15i User Guide
P
ro
duc
t O
ver
vi
ew
Keypad Character Assignment
The following table shows the characters which are assigned to each number key on the
Numeric Keypad:
Editing Numbers or Names
To correct a mistake, move the cursor under the wrong character by pressing
or
.
Press the correct number to overwrite the incorrect character. If [Clear/Clear All] is pressed,
all the characters are deleted.
Inserting a Pause
With some telephone systems an access code (9 for example) is required and a second dial
tone is heard. In this instance a pause must be entered in the telephone number. A pause can
also be entered within a Speed Dial number.
To insert a pause, press [Redial/Pause] at the appropriate place while entering the telephone
number. A “-” will appear in the display at the corresponding location.
KEY
ASSIGNED NUMBERS, LETTERS OR
CHARACTERS
1
1> Space
2
A > B> C > 2
3
D > E > F > 3
4
G > H > I > 4
5
J > K > L > 5
6
M > N > O > 6
7
P > Q > R > S > 7
8
T > U > V > 8
9
W > X > Y > Z > 9
0
+ > - > , > . > ‘ > / > * > # > & > 0