Faxing a document, Typical application, Procedure – Xerox WorkCentre Pro 75 EN User Manual

Page 84

Advertising
background image

Page 70

Xerox WorkCentre Pro/CopyCentre User Guide

Faxing a Document

Typical Application

Fax a document to a single number or multiple numbers.

Procedure

1. Load your original face up in the Document Feeder.
2. Press the Fax button on the Touch Screen. If

Authentication is active, you must complete a login
sequence. Remember to log out to prevent unauthorised
access.

3. Enter the fax number using the numeric keypad (some

configurations require entering a digit and the Dial Pause
button to reach an outside line).

4. If originals are 2 Sided, press 2 Sided Originals.

If you are faxing to a single number, skip to step 11.

5. Press Add to Send List on the Touch Screen.
6. Enter the next fax number using the numeric keypad.
7. Repeat steps 3 and 4 until the last fax number has been

added to the list (up to 50 fax numbers may be entered).

8. Press the Send List button to verify the numbers entered

have been added to the Send List.

9. Press the Close button after verification.

Advertising
This manual is related to the following products: